c arling t echnologies ? 23 www.carlingtech.com ls-series rocker switches 2 lighting sequence 1,2 position 1 position 2 position 3 01 red red red 02 amber amber amber 03 green green green 10 red --- none 11 red clear red 12 red clear amber 13 red clear green 14 red clear blue 15 red clear clear 20 amber --- none 21 amber clear red 22 amber clear amber 23 amber clear green 24 amber clear blue 25 amber clear clear 30 green --- none 31 green clear red 32 green clear amber 33 green clear green 34 green clear blue 35 green clear clear 40 blue --- none 41 blue clear red 42 blue clear amber 43 blue clear green 44 blue clear blue 45 blue clear clear 50 clear --- none 51 clear clear red 52 clear clear amber 53 clear clear green 54 clear clear blue 55 clear clear clear 3 actuator color 4 bl black wh white 5 lamp v oltage ls1511 1 base part number notes 1 independent lamp is standard. dependent lamp with on-off function (including momentary) is available with lighting sequences 10, 20, 30, 40 and 50. (no light in off position.) 2 green and blue not recommended with 125 volt or 250 volt neon lamps. 3 additional terminations available. consult factory. 4 custom colors available. consult factory. ( ) indicates momentary function. 5 lamp voltage 2 neon 125 125 volts neon 250 250 volts incandescent 006 6 volts 012 12 volts 018 18 volts 024 24 volts - - 2 lighting sequence 4 base color bl 012 1 base part number: series/poles/illumination/ circuitry 2 /rating/termination 3 10a 250vac, 15a 125vac, 3/4 hp 125-250vac, 15a 15-28vdc single pole solder lug .250 tab screw term. wire leads on-none-off ls1510 ls1511 ls1514 ls1515 on-none-(off) ls1520 ls1521 ls1524 ls1525 (on)-none-off ls1530 ls1531 ls1534 ls1535 on-none-on ls1540 ls1541 ls1544 ls1545 on-none-(on) ls1550 ls1551 ls1554 ls1555 on-off-on ls1560 ls1561 ls1564 ls1565 on--off-(on) ls1570 ls1571 ls1574 ls1575 (on)-off-(on) ls1580 ls1581 ls1584 ls1585 13 - 3 actuator color bl - 4 base color 4 bl black wh white ls-series rocker switches the ls-series softspot illuminated rocker switches feature a three-color high brightness light sequence, from a single lamp. these switches are designed with a standard nylon snap-in bracket and ?rip-dry?construction that protects the front panel from dust and moisture, and are ideal for marine and transportation industry applications. dielectric strength 1000v - live to dead metal parts electrical life 50,000 cycles- maintained 25,000 cycles- momentary mechanical life 100,000 cycles operating temperature 0? to 150? (-17.8? to +65.6?) terminal type wire lead screw (assembled) printed circuit .250 tab (q.c.) #6-32nc-2 thread .187 tab (q.c.) solder lug mounting hole (nylon snap-in brackets) p anel thickness: .040 min. - .250 max. switch should be mounted at 90 for maximum water shedding (45 to 90 acceptable) * angled corners are suggested for optimum fit. standard rectangular cutout is acceptable. .150[3.81] dia .055[1.40] dia .187[4.75] 4 plcs* .187[4.75] .350[8.89] .187[4.74] .330[8.38] .075[1.91] dia .437[11.09] .250[6.35] .500[12.70] 6.000[152.40] .141[3.58] .286[7.26] .370[9.39] .125[3.18] dia .422[10.72] 1.700[43.18] .830[21.08] 1.450[36.83] 1.084[27.53] .960[24.38] 1.190[30.22] 55 .680[17.27] .372[9.45] .394[10.00] .187[4.74]
|
